American Centrifuge overview
Governor’s Energy Summit
December 6, 2011
USEC’s Role in the Nuclear Fuel Cycle
NAC International (USEC),
HOLTEC, Areva
Worldwide Enrichment Industry
USEC (U.S.)
Urenco (Germany/Netherlands/U.K)
Areva (France)
Other (various)
3
Rosatom/Tenex (Russia)
Front-End Nuclear Fuel Industry:
$22 Billion
Enrichment Industry:
≈ 49 MMSWU
4
or $8 Billion
2010 Average Share of Worldwide Deliveries
2
2010 Front-End Nuclear Fuel Market Costs
1
$47/lb U
3
O
8
1
Based on TradeTech, LLC 2010 average term market prices for SWU and conversion and average uranium price of $47/lb U3O8. Assumes 4.0% product assay, 0.30 w/o tails
and 0.5% conversion losses
2
USEC estimate
3
Includes supply from China, Japan, and Brazil
4
WNA Reference case 2010 worldwide demand (assumes 0.25% tails assay for Western-origin reactors and 0.15% tails assay for Russian-origin reactors)
What is enrichment?
Uranium is a naturally occurring element containing U235 and
U238 isotopes. Only the U235 isotope is fissionable.
Enrichment is the process of increasing the concentration of
U235 in natural uranium and decreasing the proportion of
U238. Uranium hexaflouride gas (UF6) is used in this process.
Natural uranium contains about 0.7% U235. The fuel that
powers a commercial nuclear reactor needs uranium with a 4%
- 5% concentration of U235.
Commercial uranium enrichment currently employs one of two
technologies: gaseous diffusion and gas centrifuge.
Gaseous diffusion
Gas centrifuge
Feed of
UF6
gas
Depleted UF6
Enriched UF6
Gaseous Diffusion Plant – Paducah, KY
Built in 1951-54 by the Atomic Energy Commission.
Gaseous diffusion production began in 1952.
Four enrichment process buildings with total floor area of
150 acres; total site area of 750 acres.
Leased from the DOE with limited USEC environmental and
decommissioning liability.
USEC has extended its lease through June 2016, with
renewal rights continuing thereafter.
The largest commercially operating uranium
enrichment facility in the United States
Current Enrichment Operations
Paducah GDP is operating at its highest
efficiency and capacity in decades.
Approximately 6.0 million Separative
Work Units (SWU) produced in 2010.
Diffusion cell
arrangement
USEC Inc. is deploying an advanced uranium enrichment technology called American Centrifuge.
This technology was developed by DOE from the late 1960s through 1985. DOE invested over $3
billion, and in the past decade USEC has invested $2 billion.
USEC improved the technology through modern materials, advanced computer design, digital
controls and state-of-art manufacturing processes.
The Next Generation in Enrichment –
American Centrifuge
DOE’s Gas Centrifuge Enrichment Program, 1980s
American Centrifuge, today
American Centrifuge – scale
Russian (Tenex)
Produce approximately
4-8 SWU per
machine per year
European (TC-12)
Produce approximately
40-45 SWU
(Note: newer TC-21
model, in development,
may produce up to 80
SWU)
American Centrifuge
Produce approximately
350 SWU
Assembled machines ready
for installation
Security of supply: enhances long-term nuclear
fuel supply; supports American energy security.
Manufacturing: develops an essential U.S.
technology and related manufacturing capacity.
American jobs: will create up to 8000
manufacturing, construction, and associated jobs in
a number of states, with 350+ in West Virginia
National security interests
: supports nuclear
energy nonproliferation efforts and maintenance and
modernization of the nuclear arsenal.
Modular expansion: production can begin
incrementally as machines are installed; allows for
potential future expansion.
Environmental benefits : uses approximately 95%
less electricity than current gaseous diffusion
technology; will reduce greenhouse gases by
10,000,000 tons of emissions each year.
Why American Centrifuge?
American Centrifuge Suppliers
* Reflects direct and indirect jobs for first tier suppliers and
contractors only. Numbers are rounded and Department of
Commerce multipliers used to calculate indirect jobs vary by
community and with time
1
American Centrifuge Project Jobs*
State Current Peak
Ohio 725
3,500 –
4,000
Tennessee 851 ~1,900
South Carolina 19 ~750
Utah 0 ~480
Alabama 28 ~380
Pennsylvania 73 ~380
West Virginia 86 ~350
Indiana 17 ~120
Total 1,800
7,500-
8,000
Work related to the American Centrifuge
Project in West Virginia occurs at ATK's
facility in Rocket Center. There ATK
manufactures the large carbon-fiber
rotors for the American Centrifuge
machines. Additionally, Northwest Pipe in
Parkersburg will manufacture steel tubing
for the external casings of the centrifuges.
More that 11,500 centrifuges are planned
to be built.
American Centrifuge – Status
Lead Cascade operations using prototype machines commenced on August 29, 2007.
More than eighteen months of demonstrated AC100 cascade operations and over 800,000
total hours of AC100 and prototype machine operations since 2007.
Performance of the Lead Cascade has been confirmed under a variety of operating conditions
with product assays consistent with industry standards.
USEC submitted a loan guarantee application to DOE in 2008, seeking $2 billion to finance
the project; the application was updated in 2010.
DOE is seeking a cooperative Research, Development, and Demonstration project to
further commercialize the technology prior to issuing a loan guarantee.
AC100 Lead Cascade
The American Centrifuge Plant
Piketon, Ohio
Interior of Process Building Where
Machines Will Be Installed
